Aptex Textiles
Manufacturer of Woven Tubular Bags
Enhancing Performance of Batteries
An ISO 9001:2008 Certified Company
Complete in House Modern Laboratory for
Tensile Strength Test
Bursting Pressure of Tube
Electrical Resistance
Oxidation Resistance
Porosity Test
Advantages
Low Electrical Resistance
High Porosity
Edge Protection against lateral short Circuit

Our  Products











Multi Tubular Gauntlets



The tube pitch is made in accordance with standard diameters. These also possess lateral finishes like t &c cut. The model tolerances for tube diameter is 0 + 0.15 mm, for gauntlet height is +- 0.5 mm, for gauntlet width is +- 0.2%, for tube pitch is +- 1%, and for electrical resistance it is +- 0.05 ohms / cm2. We supply gauntlets with a number of diameters to choose from like 5mm, 6.0 mm, 6.2mm,7.23 mm, 8.0 mm, as per the requirements.



Product  Quality



The company has its own in house laboratory fully equipped to carry out the physical,chemical and electrical tests necessary. in our well equipped lab we are trying to make continual improvement of our product.




Product  Specifications



WOVEN MULTI TUBULAR GAUNTLETS,100PERCENT TENACITY POLYESTER CONTINOUS FILAMENT YARN WITH PROTECTIVE RESIN COATING
COLOUR-WHITE
STANDARD DIAMETER-8MM&6MM
OTHERS-5MM,6.2MM,7.23MM
PITCH LENGTH-9.6 FOR 8MM-15SPINE
TOLERANCE-LENGTH-+- .5MM
WIDTH-+- 2MM
- 20 % of the end tubes are reinforced with a double weave to fortify its strength and to ensure active material is contained within avoiding shorts.




Product  Tests



PHYSICAL TEST
MAX LOAD AT BREAK-235KG/5CM
ELECTRICAL RESISTANCE-.21 TO .25OHM/CM SQUARE
OXIDATION STABILITY-0.5%MAX
BURSTING PRESSURE-UPTO 40BAR FOR 1MIN




Manufacturing   Facility



Manufacturing Facility of APTEX TEXTILES is quiet comprehensive with the most modern state-of-art machineries comprising separate floors for manufacturing, assembly, testing, research & development, all within its premises. we can manufacture more than 1lakh -gauntlets per day.